Replacing Commercial Refrigeration Gaskets Atlanta
by Scott Patterson
A refrigerator is a good piece of equipment that is supposed to give you service for several years. Whether it is used in a household or commercial setup, it should look substantial and act functionally well to store things at cool temperatures. However, after several years of use, the temperature of some refrigerators may slowly go up over time. Warm air flows inside lowering the temperatures even when the door is shut. If this happens the first thing that is normally recommended is the replacement of <a href="www.inspectorgaskets.com/services">refrigeration gaskets Atlanta</a>.
A refrigeration gasket is that strip that you will find on the door edges of your refrigerator door. It is usually made of rubber and its main purpose is to keep the refrigerator door tightly shut. This prevents the entry of any warm air into the fridge. It also keeps the cold air in when the door is closed.
Apart from the gasket, modern refrigerators also contain magnets. These magnets support the gasket and give the door an extra grip. This helps keep the door shut tightly.
At some point in a refrigerator's life, the gaskets can wear out. When this happens, warm air gets into the refrigeration space and reduces the cooling effect. This ends up preventing the buildup of frost on the cooling coils.
The result of the entry of the warm air impact the overall performance of the refrigerator greatly. Not only does it not perform at its best but it also tends to consume more energy to keep running. This is mostly during the defrost cycle.
Identifying a faulty gasket is simple and will only take a few minutes. One needs to be sure that the gasket is the issue of the poor performance of the refrigerator before one can replace it. A simple technique can help you do this.
You can start by inspecting the gasket visually all-round the door. Look out for any cracks, dirt buildup such as decaying food or mold. You should confirm that the gasket is properly fitting all around the door. The refrigerator door should also be properly aligned with no warping.
If the visual inspection results are good and the gasket seems proper, the next step is to check the strength of its seal. You can confirm this by slipping a bill on the door and shutting it. Normally when the gasket is in proper shape, you should experience resistance when trying to pull the bill out. If little or no resistance is encountered, then the gasket is faulty and needs to be replaced. Repeat this step at all points to be sure.
The magnetic strip gaskets in the modernly designed refrigerators are easier to replace when compared to the old designs. However, you need to identify the type of gasket you have so you can get the exact same one. In a commercial setup where there are different types of refrigerators, this is not a simple task. Different refrigerator manufacturers use different types of gaskets.
In this situation, the best approach is to deal directly with a gasket consultant who can identify the gasket type you need for your refrigerator. This will avoid the trouble of getting the wrong gasket and not solving the real problem. The consultant can also help replace the gasket by installing and inspecting it afterward to ensure it works perfectly.
You can get valuable tips on how to choose an installer of <a href="http://www.inspectorgaskets.com/services">refrigeration gaskets Atlanta</a> area and more information about a knowledgeable installer at http://www.inspectorgaskets.com/services now.
---------------------------------------------------
You are receiving this because you signed up for it on 2016-04-14 from IP
To fine-tune your selection of which articles to receive, just login here:
http://www.uniquearticlewizard.com/bloggers/
using your username:
To unsubscribe please use the following link:
http://www.uniquearticlewizard.com/unsubscribe.php?mail=afm1320046. adelfa @blogger.com&code=6ae952a95f14780ab4c560079e097e7d
---------------------------------------------------
ليست هناك تعليقات:
إرسال تعليق